King/Queen Controller with Photon/PEMF

King/Queen Controller with Photon/PEMF

$60.00
( / )
Description

Please add a note to your order including what model of the mat you need a controller for. Queen and King mats have a controller with separate settings for each side of the mat. HealthyLine produces almost 100 mat variations with different sizes, power, and functions. We use over a dozen different controllers. If your mat came with a different one, they all work similarly. However, they may not substitute each other even if they fit in the jack. Please DO NOT switch controllers between different mats. First, please plug your controller deep into the mat’s jack and then into a power outlet. This unit is under warranty. If anything happens just send us an email to info@HealthyLine.com with a picture of the controller and detailed information about the concern. Remember, the mat is made of many functional layers. It takes 5-to-25 minutes for the stones to heat up completely. Keep the mat covered with a blanket and/or lie on the mat to make it heat up faster.

  1. Flip the Power switch (№1) on. The display will start to show a red light. You can use this switch to turn the power off.
  2. Press the Time button (№2) to choose between  3-hour, 6-hour, or 12-hour settings. The green light indicates which time setting is selected.
  3. Turn the dial (№3) clockwise to increase the temperature and counterclockwise to decrease the temperature from 30°C (85°F) to 70°C (160°F). 
  4. The red LED display (№4) begins by showing the actual temperature. When you start turning the dial it shows your selected temperature for a few seconds, and then goes back to showing the actual temperature. Once the selected temperature is reached, the red display will start showing blinking lines instead of the temperature. 
  5. Press the Photon button (№5) to turn the photon lights on or off. The lights operate independently with or without heat. 
  6. Press the PEMF button (№6) to turn PEMF on or off. The PEMF function works independently with or without heat. When you press the button, the PEMF is on for 20 minutes, then goes off for 100 minutes, then repeats again. To start a fresh 20 minutes you can always turn the PEMF off and then back on. The PEMF light stays on even during the 100 minutes off phase.

Please add a note to your order including what model of the mat you need a controller for. Queen and King mats have a controller with separate settings for each side of the mat. HealthyLine produces almost 100 mat variations with different sizes, power, and functions. We use over a dozen different controllers. If your mat came with a different one, they all work similarly. However, they may not substitute each other even if they fit in the jack. Please DO NOT switch controllers between different mats. First, please plug your controller deep into the mat’s jack and then into a power outlet. This unit is under warranty. If anything happens just send us an email to info@HealthyLine.com with a picture of the controller and detailed information about the concern. Remember, the mat is made of many functional layers. It takes 5-to-25 minutes for the stones to heat up completely. Keep the mat covered with a blanket and/or lie on the mat to make it heat up faster.

  1. Flip the Power switch (№1) on. The display will start to show a red light. You can use this switch to turn the power off.
  2. Press the Time button (№2) to choose between  3-hour, 6-hour, or 12-hour settings. The green light indicates which time setting is selected.
  3. Turn the dial (№3) clockwise to increase the temperature and counterclockwise to decrease the temperature from 30°C (85°F) to 70°C (160°F). 
  4. The red LED display (№4) begins by showing the actual temperature. When you start turning the dial it shows your selected temperature for a few seconds, and then goes back to showing the actual temperature. Once the selected temperature is reached, the red display will start showing blinking lines instead of the temperature. 
  5. Press the Photon button (№5) to turn the photon lights on or off. The lights operate independently with or without heat. 
  6. Press the PEMF button (№6) to turn PEMF on or off. The PEMF function works independently with or without heat. When you press the button, the PEMF is on for 20 minutes, then goes off for 100 minutes, then repeats again. To start a fresh 20 minutes you can always turn the PEMF off and then back on. The PEMF light stays on even during the 100 minutes off phase.
Specifications

ATTENTION!

Please add a note to your order what model of the mat you need a controller for

All controllers are not compatible with non-HealthyLine mats.

Please contact us via email or phone to purchase any controller.

Each controller is built to accommodate 110V as well as 220V, 50-60Hz. It is the construction of the mat itself that works for either 110V or 220V. When you order a 110V or a 220V unit, we make sure that you receive a specific mat that was made to accommodate the desired voltage. It is perfectly safe to use your mat with the controller provided in a package.

ATTENTION!

Please add a note to your order what model of the mat you need a controller for

All controllers are not compatible with non-HealthyLine mats.

Please contact us via email or phone to purchase any controller.

Each controller is built to accommodate 110V as well as 220V, 50-60Hz. It is the construction of the mat itself that works for either 110V or 220V. When you order a 110V or a 220V unit, we make sure that you receive a specific mat that was made to accommodate the desired voltage. It is perfectly safe to use your mat with the controller provided in a package.

King/Queen Controller with Photon/PEMF

We Are Here To Help

Get answers to our most frequently asked questions.

Read All FAQs

Speak with a HealthyLine Expert

sales@HealthyLine.com

(888) 774-4422

Monday – Friday 10 AM – 7 PM EST

Read our guide to choosing the right HealthyLine mat

Find Your Mat