"Please add a note to your order including what model of the mat you need a controller for. Queen and King mats have a controller with separate settings for each side of the mat. HealthyLine produces almost 100 mat variations with different sizes, power, and functions. We use over a dozen different controllers. If your mat came with a different one, they all work similarly. However, they may not substitute each other even if they fit in the jack. Please DO NOT switch controllers between different mats. First, please plug your controller deep into the mat’s jack and then into a power outlet. This unit is under warranty. If anything happens just send us an email to info@HealthyLine.com with a picture of the controller and detailed information about the concern. Remember, the mat is made of many functional layers. It takes 5-to-25 minutes for the stones to heat up completely. Keep the mat covered with a blanket and/or lie on the mat to make it heat up faster. 1. Flip the Power switch (№1) on. The display will start to show a red light. You can use this switch to turn the power off. 2. Press the Time button (№2) to choose between  3-hour, 6-hour, or 12-hour settings. The green light indicates which time setting is selected. 3. Turn the dial (№3) clockwise to increase the temperature and counterclockwise to decrease the temperature from 30°C (85°F) to 70°C (160°F). 4. The red LED display (№4) begins by showing the actual temperature. When you start turning the dial it shows your selected temperature for a few seconds, and then goes back to showing the actual temperature. Once the selected temperature is reached, the red display will start showing blinking lines instead of the temperature. 5. Press the Photon button (№5) to turn the photon lights on or off. The lights operate independently with or without heat. 6. Press the PEMF button (№6) to turn PEMF on or off. The PEMF function works independently with or without heat. When you press the button, the PEMF is on for 20 minutes, then goes off for 100 minutes, then repeats again. To start a fresh 20 minutes you can always turn the PEMF off and then back on. The PEMF light stays on even during the 100 minutes off phase. "